Eisterer M., Scheuerlein C., Taborelli M., Member, IEEE, Piccin R., Parragh D.M., Ravotti F., Pezzullo G., Ternova D., Lehner M.
Ключевые слова: LHC, luminosity, accelerator magnets, quench protection, quench, heater, fabrication
Bottura L., Scheuerlein C., Devred A., Savary F., Lee P.J., Balachandran S., Wolf F., Cooper J., Oss O.B.
Ключевые слова: LHC, luminosity, coils, magnets dipole, LTS, Nb3Sn, cables, filaments, crack formation, microstructure, experimental results
Scheuerlein C., Michiel M.D., Lackner F., Andrieux J., Michels M., Hagner M., Meyer C., Chiriac R., Toche F.
Ключевые слова: LHC, bus bar conductor, insulation, design, magnets, insulating medium, thermal properties, mechanical properties
Ключевые слова: LHC, luminosity, upgrade, design, fabrication, bus bar conductor, LTS, NbTi, Rutherford cables, insulation, Nb3Sn, joints, prototype, test results
Ключевые слова: magnets, LTS, Nb3Sn, mechanical properties, stress distribution, strain effects, texture, distribution, neutron diffraction, elastic behavior, experimental results
Scheuerlein C., Savary F., Tommasini D., Lackner F., Bourcey N., Michels M., Zurita A.C., Troitino S.F.
Scheuerlein C., Savary F., Lackner F., Konstantopoulou K., Rehmer B., Finn M., Uhlemann P., Meyer C., Amez-Droz M., Meuter F., Tock J-P.
Eisterer M., Scheuerlein C., Lackner F., Baumgartner T., Koettig T., Ebermann P., Daly M., Behnsen J., Terricabras A.G.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, fabrication, RRP process, mechanical properties, transverse stress, degradation studies, magnetization, transport currents, deformation, crack formation, microstructure, stress distribution, resistive transition, critical caracteristics, critical current, pressure dependence, current-voltage characteristics, n-value, critical current density, critical temperature, upper critical fields, experimental results, numerical analysis
Bottura L., Tock J., Auchmann B., Bednarek M., Calcoen D., Charifoulline Z., Coelingh G., D'Angelo G., Hagen P., Naour S.L., Mentink M., Milanese A., Bottura M.L., Tock J., Auchmann B., Bednarek M., Calcoen D., Charifoulline Z., Coelingh G., D'Angelo G., Hagen P., Rodriguez-Mateos F., Romera I., Scheuerlein C., Schmidt R., Siemko A., Solfaroli M., Steckert J., Todesco E., Verweij A., Willering G., Wollmann D., Zerlauth M., Naour S.L., Mentink M., Milanese A., Modena M., Montabonnet V., Perin A., Pojer M.
Ключевые слова: accelerator magnets, LHC, fault currents, modeling, numerical analysis
Scheuerlein C., Verweij A., Siemko A., Steckert J., Charifoulline Z., Denz R., Naour S.L., Bednarek M.J., Zerlauth M., Tock J.
Scheuerlein C., Schoerling D., Lackner F., Wolf F., Schladitz K., Richter S., Ebermann P., Kelly U.M., Redenbach C., Meinel D.
Ключевые слова: LTS, Nb3Sn, wires, sample shapes, homogeneity, Rutherford cables, deformation, X-ray tomography, aspect ratios, distribution, experimental results
Ключевые слова: LTS, Nb3Sn, Rutherford cables, NbTi, winding techniques, LHC, luminosity, FCC, deformation, mechanical properties, stability, magnets dipole, magnets quadrupole, fabrication
Ambrosio G., Ferracin P., Scheuerlein C., Savary F., Todesco E., Perez J.C., Sahner T., Prin H., Principe R., Lackner F., Luzieux S., Bourcey N., Duret M., Triquet S., Cavanna E., Revilak P., Michels M., Pozzobon M., Genestier T., Axensalva J., Semeraro M.
Ключевые слова: LHC, luminosity, LTS, Nb3Sn, magnets dipole, prototype, fabrication, coils, supporting structure, status, fabrication, heat treatment
Ключевые слова: LHC, upgrade, magnetic systems, LTS, Nb3Sn, mechanical properties, friction, crack formation, test results, measurement setup, design, displacements, shimming
Flukiger R., Scheuerlein C., Шавкин С.В., Ballarino A., Дегтяренко П.Н., Spina T., Круглов В.С., Латушкин С.Т., Рязанов А.И., Семенов E., Унежев В.Н., Bottura L.*2. Гаврилкин С.Ю.
Flukiger R., Bottura L., Scheuerlein C., Ballarino A., Spina T., Cerutti F., Ryazanov A., Shavkin S., Zubavichus Y., Svetogovov R.D., Degtyarenko P., Semenov Y., Senatore C*2., Cerny R.
Ferracin P., Scheuerlein C., Savary F., Todesco E., Perez J.C., Prin H., Principe R., Lackner F., Luzieux S., Duret M., Triquet S., Cavanna E., Ohnweiler T., Revilak P., Pozzobon M., Genestier T.
Ключевые слова: LHC, luminosity, LTS, Nb3Sn, coils, prototype, fabrication, status, magnets quadrupole, supporting structure, heat treatment
Ключевые слова: LHC, luminosity, mechanical properties, stress effects, strain effects, distribution, LTS, Nb3Sn, magnets dipole, tensile tests, elastic behavior
Ключевые слова: MgB2, wires multifilamentary, Neutron tomography
Flukiger R., Bottura L., Scheuerlein C., Savary F., Michiel M.D., Lackner F., Hofmann M., Lorentzon M.
Scheuerlein C., Ostojic R., Bordry F., Pojer M., Savary F., Perin A., Charifoulline Z., Garion C., Prin H., Atieh S., Tock J.P., Dahlerup-Petersen K., Bourcey N., Bodart D., Cruikshank P., Dalin J.M., Musso A.
Ключевые слова: LHC, joints, magnets, solder, joint resistances, magnets dipole
Flukiger R., Bottura L., Scheuerlein C., Richter D., Ballarino A., Spina T., Cerutti F., Esposito L.S., Lechner A.
Scheuerlein C., Bordini B., Ballarino A., Alknes P., Hagner M., Fritz J.M., Zielke L., Vierrath S., Thiele S.
Ключевые слова: MgB2, wires multifilamentary, porosity, measurement technique, microstructure, anisotropy, experimental results
Bottura L., Larbalestier D.C., Scheuerlein C., Rikel M.O., Hellstrom E.E., Jiang J., Kametani F., Michiel M.D., Ballarino A., Kadar J., Andrieux J., Doerrer C.
Ключевые слова: HTS, Bi2212/Ag, wires, fabrication, melting, phase formation, oxygenation treatments, PIT process, X-ray diffraction
Bottura L., Larbalestier D.C., Scheuerlein C., Tarantini C., Sailer B., Bordini B., Ballarino A., Thoener M., Schlenga K., Lee P.J., Segal C., Sung Z.H.
Tixador P., Bottura L., Yang Y., Goldacker W., Scheuerlein C., Rossi L., Senatore C., Rutt A., Fleiter J., Ballarino A., Kario A., Dhalle M.M., Badel A., Barth C., Himbele J., Usoskin A*6.
Ключевые слова: accelerator magnets, HTS, YBCO, coated conductors, Roebel conductors, Bi2212, wires round, comparison, CORC cables, twisting, stacked blocks, critical caracteristics, critical current
Sugano M., Scheuerlein C., Bordini B., Ballarino A., Alknes P., Bjoerstad R., Hudspeth J., Hagner M.
Bottura L., Sugano M., Scheuerlein C., Rikel M.O., Ballarino A., Bjoerstad R., Hudspeth J., Grether A.
Ключевые слова: HTS, YBCO, YGdBCO, coated conductors, DI-Bi2223, tapes, Bi2212, wires round, mechanical properties, stress effects, strain effects, transverse stress, X-ray diffraction, critical caracteristics, critical current, degradation studies, n-value, lattice parameter, experimental results, electromechanical analysis
Flukiger R., Bottura L., Scheuerlein C., Kruglov V.S., Ballarino A., Degtyarenko P.N., Vasiliev A.L., Spina T., Shavkin S.V., Gavrilkin S.Y., Karateev I.A., Latushkin S.T., Ryazanov A.I., Semenov E.V., Unezhev V.N.
Ключевые слова: LTS, Nb3Sn, bulk, plates, irradiation effects, proton irradiation, milling process, magnetization, remanent field, susceptibility, experimental results
Bottura L., Scheuerlein C., Bertinelli F., Fessia P., Ballarino A., Tock J.-P., Heck S., Thonet P., Solfaroli M., Andreassen O.
Ключевые слова: LHC, joints, bus bar conductor, test results, Rutherford cables, resistance, control systems, series connection, solder, quality control
Bottura L., Sugano M., Scheuerlein C., Ballarino A., Rikel M., Bjoerstad R., Hudspeth J., Grether A.
Ключевые слова: presentation, LTS, Nb3Sn, mechanical properties, synchrotron, X-ray diffraction, texture, stress effects, strain effects, lattice parameter, compression, measurement setup, tensile tests, HTS, Bi-based systems, REBCO, Bi2212, n-value, critical caracteristics, critical current, degradation studies, MgB2, Bi2223, transverse stress, elastic behavior
Ключевые слова: Rutherford cables, LTS, NbTi, joints, joint resistances, inductance, LHC, defects, experimental results, critical caracteristics, current-voltage characteristics
Ключевые слова: MgB2, LHC, luminosity, cables, links, filaments, elastic behavior, tensile tests, barriers, experimental results, stress effects, strain effects, mechanical properties
Ключевые слова: LTS, Nb3Sn, critical caracteristics, wires, irradiation effects, proton irradiation, critical temperature, critical current, pinning force
Bottura L., Sugano M., Scheuerlein C., Rikel M.O., Jiang J., Michiel M.D., Ballarino A., Matras M., Bjoerstad R., Hudspeth J.
Ключевые слова: HTS, Bi2212, wires round, densification, mechanical properties, strain effects, degradation studies, critical caracteristics, critical current, overpressure processing, strain effects, X-ray diffraction, measurement setup, n-value, lattice parameter, temperature dependence, thermal expansion
Scheuerlein C., Verweij A., Savary F., Prin H., Principe R., Lackner F., Grand-Clement L., Duret M., Tock J.-Ph., Triquet S.
Ключевые слова: LHC, joints, Rutherford cables, solder, test results
Bottura L., Larbalestier D.C., Scheuerlein C., Rikel M.O., Hellstrom E.E., Jiang J., Kametani F., Michiel M.D., Ballarino A., Kadar J., Andrieux J., Doerrer C.
Ключевые слова: LTS, Nb3Sn, wires, pinning force, neutron irradiation
Scheuerlein C., Bordini B., Michiel M.D., Ballarino A., Arnau G., Thilly L., Alknes P., Jimenez N., Besara T., Siegrist T.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, texture, measurement technique, neutron diffraction, synchrotron
Larbalestier D.C., Scheuerlein C., Chen P., Hellstrom E.E., Jiang J., Trociewitz U.P., Kametani F., Lee P.J., DALBAN-CANASSY M., Matras M., Craig N.C.
Flukiger R., Bottura L., Seeber B., Scheuerlein C., Senatore C., Buta F., Bordini B., Ballarino A., Di Michiel M., Besara T., Siegrist T., Kadar J.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, mechanical properties, stress distribution, lattice parameter, tensile tests, experimental results
Scheuerlein C., Ostojic R., Bordry F., Pojer M., Savary F., Perin A., Garion C., Atieh S., Tock J.P., Dahlerup-Petersen K., Bourcey N., Bodart D., Cruikshank P., Dalin J.M., Musso A.
Ключевые слова: accelerator magnets, LHC, status, magnetic systems, shunt, insulating medium, high field magnets
Kikuchi A., Tsuchiya K., Takeuchi T., Scheuerlein C., Nakamoto T., Ballarino A., Nakagawa K., Di Michiel M., Jin X.
Ключевые слова: LTS, Nb3Al, fabrication, wires multifilamentary, precursors, measurement technique, synchrotron, X-ray diffraction, heat treatment, phase composition
Larbalestier D.C., Scheuerlein C., Hong S., Miao H., Parrell J.A., Hellstrom E.E., Jiang J., Trociewitz U.P., Huang Y., Ghosh A.K., Di Michiel M.
Flukiger R., Bottura L., Scheuerlein C., Ballarino A., Otto T., Catherall R., Glaser M., Militaru O.
Ключевые слова: LTS, Nb3Sn, wires, proton irradiation, irradiation effects, experimental results
Flukiger R., Eisterer M., Weber H.W., Bottura L., Scheuerlein C., Senatore C., Ballarino A., Spina T., Baumgartner T.
Ключевые слова: LHC, series connection, joint resistances, accelerator magnets, cables, LTS, bus bar conductor, NbTi, joints, solder, high field magnets
Ключевые слова: LTS, Nb3Sn, strands, joints, fabrication, joint resistances, temperature dependence, hardness, experimental results, solder
Ключевые слова: LTS, Nb3Sn, strands, thermomagnetic instability, RRP process, current, magnetic field dependence
Malagoli A., Larbalestier D.C., Scheuerlein C., Miao H., Parrell J.A., Hellstrom E.E., Jiang J., Huang Y., Kametani F., Michiel M.D., Shen T.
Ключевые слова: LTS, Nb3Sn, internal tin method, microstructure, strands, critical caracteristics, critical current density, experimental results
Ключевые слова: LTS, Nb3Sn, internal tin method, fabrication, phase formation, grain structure, composition, strands, microstructure
Verweij A.P., Scheuerlein C., Bertinelli F., Fessia P., Mathot S., Willering G.P., ten Kate H., Perin A., Sgobba S., Steckert J., Tock J.-P., Lasheras N., Charifoulline Z., Denz R., Garion C., Koratzinos M.
Ключевые слова: LTS, LHC, joints, joint resistances, bus bar conductor, critical caracteristics, current-voltage characteristics, experimental results
Ключевые слова: accelerator magnets, LHC, thermal runaway, stabilizing layers, shunt, joints, experimental results, high field magnets
Bottura L., Scheuerlein C., Pfeffer H., Bertinelli F., Fessia P., Tock J.-P., Dalin J.-M., Flora R.H., Heck S., Prin H., Thonet P., Williams L.B.
Ключевые слова: accelerator magnets, LHC, bus bar conductor, joints, joint resistances, defects, experimental results, high field magnets, quality control
Ключевые слова: joints, strands, electrolysis, deposition setup, Nb3Sn, LTS, fabrication, joint resistances, experimental results
Ключевые слова: LTS, Nb3Sn, fabrication, nucleation, strands, wires multifilamentary, measurement technique, synchrotron, upper critical fields
Malagoli A., Larbalestier D.C., Scheuerlein C., Hellstrom E.E., Jiang J., Kametani F., Di Michiel M., Scheel M.
Ключевые слова: LTS, Nb3Sn, composites, strands, PIT process, fabrication, microstructure, composition
Ключевые слова: LTS, Nb3Sn, doping effect, composition, PIT process, phase formation, precursors, microstructure, nanoscaled effects, fabrication
Ключевые слова: LTS, Nb3Sn, fabrication, internal tin method, phase formation, heat treatment, strands
Ключевые слова: LTS, Nb3Sn, PIT process, heat treatment, phase formation, fabrication
Ключевые слова: LTG process, Nb3Sn, internal tin method, fabrication, porosity, measurement technique
Ключевые слова: LTS, NbTi, magnets dipole, magnets quadrupole, coatings, LHC, accelerator magnets, experimental results, power equipment, dip coating technique, high field magnets
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.